User's Manual

701-070801 Rev A This document contains proprietary information,
see proprietary statement on first page.
Page 32 of 85
shall be tuned to the new active frequency (previously the standby frequency). Figure 32 depicts the
active transceiver both prior to, and after, pressing the Transfer-Button.
RT1
121.500
127.300
8.3K TEST 25K
◄
◄
90%
RT1
127.300
121.500
8.3K TEST 25K
◄
◄
90%
Figure 32 Changing Active Frequency by Transfer
When the unit is operating in ATC-COM mode and standby tuning is enabled the operator shall be able
to focus the standby frequency’s megahertz field. When the megahertz field has the focus, turning the
Value knob clockwise shall increment the frequency by 1 MHz, while turning the knob counterclockwise
shall decrement the frequency by 1 MHz. Figure 33 depicts the standby frequency being tuned by MHz.
Figure 33 Changing Standby Frequency by MHz