User's Manual

701-070801 Rev A This document contains proprietary information,
see proprietary statement on first page.
Page 29 of 85
If the operator presses PTT while a non-scanning transceiver is active, the transceiver being scanned
shall remain scanning.
If the operator changes channel on a scanning transceiver, the newly tuned channel shall become the
active channel and the system shall continue scanning. If the operator changes channel on a non-
scanning transceiver, the transceiver being scanned shall remain scanning.
If the operator presses the SCAN Transceiver-Menu button, the system shall stop scanning and display
the Select-Scan-Group page. This allows the operator to quickly select another group to scan, edit the
selected scan group, or exit scan mode completely.
6.4.1.6.8 View Channel Properties Page
The View-Channel-Properties page shall allow the user to view all known properties of any channel
known to the transceiver. The transceiver whose channels are being displayed shall be identified.
Channel properties expected to be displayed are detailed in Table 4. Figure 29 depicts the desired
layout for this page.
PRESCOTT TWR
Property
List
ScrollBar
TitleBar RT1 Preset 105
105
Channel Number
◄
◄
PRESCOTT TWR
Alphanumeric ID
138.125
Receive Frequency
138.125
Transmit Frequency
273
Receive NAC
273
Transmit NAC
Standard
Receive Bandwidth
25.0 Khz
Transmit Deviation
Figure 29 View Channel Properties Page