User's Manual

701-070801 Rev A This document contains proprietary information,
see proprietary statement on first page.
Page 22 of 85
Figure 19 Changing Active Channel by Transfer
When the unit is operating in tactical mode and standby tuning is enabled the operator shall be able to
focus the standby channel’s Channel-Number field. When the Channel-Number field has the focus,
turning the Value knob clockwise shall select the next available channel by number, while turning the
knob counterclockwise shall select the previous available channel by number. Figure 20 depicts the
standby channel being tuned by number.
Figure 20 Changing Standby Channel by Number
When the unit is operating in tactical mode and standby tuning is enabled the operator shall be able to
focus the standby channel’s Channel-Alpha field. When the Channel-Alpha field has the focus, turning
the Value knob clockwise shall select the next available channel by alphanumeric identifier, while turning