User's Manual

701-070801 Rev A This document contains proprietary information,

see proprietary statement on first page.

Page 20 of 85

RT1

VOL:

90%90%

CHAN MUTE VOL

PVTDIR

◄

90%

Figure 16 Volume Adjustment Dialog

6.4.1.5.4 Quick Memory (QMEM)

The QMEM feature allows the operator to store/recall frequencies much like presets on a car stereo.

When the operator presses the QMEM Transceiver-Menu button, the QMEM selection dialog shall be

displayed. The QMEM selection dialog allows the operator to either recall or program a QMEM location.

When the operator momentarily presses a QMEM location, the channel programmed into the

corresponding (0-9) QMEM location shall be loaded into the active channel, and the previously active

channel shall be loaded into the standby channel. If the operator presses and holds a QMEM location

(0-9) for 3 or more seconds, the current active channel shall be programmed into the corresponding

QMEM location. Should the operator not press any key for more than 4 seconds after pressing the

QMEM Transceiver-Menu button, the QMEM operation shall automatically be canceled. The operator

shall be able to manually cancel the QMEM operation by pressing the Cancel button. There shall be 10

QMEM locations for Tactical mode, and another 10 QMEM locations for ATC-COM mode. Figure 17

depicts the QMEM selection dialog in Tactical Mode.

Select QMEM

0: PRESCOTT TWR

2: CHINO FD

4: N/A

6: N/A

8: N/A

Cancel

1: WEATHER

3: PRESCOTT PD

5: N/A

7: N/A

9: N/A

Figure 17 QMEM Selection Dialog