User's Manual
701-070801 Rev A This document contains proprietary information,
see proprietary statement on first page.
Page 15 of 85
PVT
Indicates transceiver is in private mode, i.e. encryption is enabled. Only
visible when transceiver is in encrypted mode. When not displayed,
transceiver is operating in the clear.
SCAN
Indicates transceiver is in scan mode. Only visible when transceiver is in
scan mode. When not displayed, transceiver is not scanning.
SIM
Indicates transceiver is participating in a simulcast. Only visible when
simulcast mode is active and the transceiver is participating in the
simulcast. When not displayed, transceiver is not participating in a
simulcast.
RLY
Indicates transceiver is participating in a relay. Only visible when relay
mode is active and transceiver is participating in the relay. When not
displayed, transceiver is not participating in a relay.
ACT--CHANNEL
Placeholder for transceiver’s active channel. Always visible. When
transceiver is in tactical mode and is tuned to a preset channel the active
channel indicator will display the alphanumeric identifier of the channel.
When transceiver is in COM mode, or the manual channel is tuned while in
tactical mode, the active channel indicator will display the receive
frequency of the channel.
When the transceiver has been turned off, all indicators except the transceiver identifier shall be
invisible, and “RADIO OFF” shall be displayed. The Dashboard-View for a transceiver that is off is
depicted in Figure 12.
Figure 12 Dashboard View – Transceiver Off
When the transceiver is not installed in the system, all indicators except the transceiver identifier shall be
invisible, and “NOT INSTALLED” shall be displayed. The Dashboard-View for a transceiver that is not
installed is depicted in Figure 13.