User's Manual
701-070801 Rev A This document contains proprietary information,
see proprietary statement on first page.
Page 14 of 85
ACT--CHANNEL
RTX
RX TX PTX
DIR PVT SCAN
SIM RLY
Figure 10 Dashboard View – Internal Transceiver
RTX
RX TX
PTX
SIM RLY
Figure 11 Dashboard View – External Transceiver
Table 1 Dashboard View Indicators
Indicator Description
RTX
Placeholder for transceiver’s identifier. Always visible. Valid values are RT1,
RT2 … RT5
RX Indicates transceiver is receiving. Only visible when receiving.
TX Indicates transceiver is transmitting. Only visible when transmitting.
PTX
Indicates transceiver is associated with PTT-X. Displayed in reverse video
(as shown) when transceiver is the active transceiver for its PTT group.
Can change if transceiver is participating in a simulcast, in which case the
simulcast trigger PTT will be displayed.
DIR
Indicates transceiver is in direct mode. Only visible when transceiver is in
direct mode. When not displayed, transceiver is in repeater mode. This
indicator should automatically appear for preset channels whose transmit
and receive frequencies are identical.