User's Manual

C-5000 COMMUNICATION MANAGEMENT CONTROLLER
INSTALLATION MANUAL
Publication No. 150-041118 Page 2-9
Rev C Section 2 – System Installation
May 2006
D. FLEXCOMM I
Note: Refer to FLEXCOMM I Transceiver System Installation Manual, Manual Number
150-040011, for specification data on FLEXCOMM Transceivers and Antennas.
Refer to VHF/FM Transceivers RT-7200, RT-9600, AN/ARC-513(V)
Installation/Operators Manual, Manual Number 150-0061-000, for specification data
on RT-9600 and RT-7200 transceivers.
E. Miscellaneous Data Loading Cables and Software
(1) 149-041389-0101 C-5000 PC cloning cable and software.
This software and cable allows the operator to program channel information into the C-
5000 via the front panel programming port.
(2) 404-041382-0101 C-5000 PC remote programmer software.
(3) 124-015911-01 5-Pin cloning cable.
(4) 124-015911-02 9-Pin cloning cable.
(5) 152-241520-01 RT-5000 KVL keyload cable.
This cable allows the operator to load encryption keys using a Motorola KVL type
keyloader into the RT-5000 (P/N 400-015525-0611 and above) via P1 connector on the
RT-5000.