User's Manual

C-5000 COMMUNICATION MANAGEMENT CONTROLLER
INSTALLATION MANUAL
Page B-2 Publication No. 150-041118
Appendix B Rev. C
May 2006
(5) Mount the new AT-560 antenna where the old RT-30 antenna was. This does require some
drilling of holes (We're good but not that good).
(6) Run the two new coax cables from the radio to the antenna.
(7) Run the Antenna tuning cable from the FC-5000 to the AT-560.
(8) Install Adapter Cable #2.
(9) Configure and program the C-5000.
(10) Verify system performance via test equipment and/or flight testing.