User's Manual

C-5000 COMMUNICATION MANAGEMENT CONTROLLER
INSTALLATION MANUAL
Publication No. 150-041118 Page 7-5
C. Encryption Verification
(1) If any of the ITM modules use encryption, verify loading encryption keys. See
C-5000 Operator's manual for instructions on how to set up the RT-5000 to receive
encryption keys (KVL Load).
(2) If the ITM module is capable of performing an OTAR and the location the system
checkout can access an OTARable station, test this function on all applicable ITM's.
(3) If an external encryption system is being used, select a channel that accesses the
encryption unit, and test receive/transmit encryption capability. Remember to load
encryption keys into the unit first. Use a handheld or communication analyzer
equipped with your encryption type to communicate with the C-5000 transceivers
under test.
Rev C Section 7 – System Checkout
May 2006