User's Manual

C-5000 COMMUNICATION MANAGEMENT CONTROLLER
INSTALLATION MANUAL
Publication No. 150-041118 Page 4-113
Rev C Section 4 –Electrical Installation
May 2006
Item Designator Description Wulfsberg P/N
Mil Spec P/N
Radio & Control Supplies
C-5000
System
Interface
Connector
P500 D-Sub (62 Pin female, with backshell and two
male jackscrews)
PN 129-215344-01
Radio Option 1:
Serial Interface
Connector
P501 and/or
P502
D-Sub (37 Pin female, with backshelI and one
each female and male jackscrews)
(For RT-5000 installations)
PN 129-217474-01
Radio Option 2:
Parallel
Interface
Connector
P501 and/or
P502
D-Sub (62 Pin female, with backshell and one
each female and male jackscrews)
(For all installations except RT-5000)
PN 129-215344-02
Rear Cloning
Port
(Optional)
P503
(Optional)
D-Sub (9 Pin female, with backshelI and two each
male jackscrews)
PN 129-2156-000
RT-5000
Interconnect
Harness
J101 Mil-Cir (55 Pin female) PN 129-216657-01
MS3126F22-55S
KVL Data Port J1 D-Sub (9 Pin female, with backshelI) PN 129-2156-000
Hi-Split RF
Connector
J102 TNC (Plug, straight) for use with RG-393 coax)
TNC (Plug, 90 degree) for use with RG-393 coax)
129-041397-01
129-011398-01
Lo-Split RF
Connector
J103 N Type (Plug, straight) for use with RG-142 coax)
N Type (Plug, 90 degree) for use with RG-142
coax)
129-049112-01
129-049113-01
Tray Option 1 Mounting Tray, Vertical, RT-5000 300-316605
Tray Option 2 Mounting Tray, Horizontal, RT-5000 300-316835
Shock Mounts
(Recommended)
Shock Mounts, RT-5000, Vertical or Horizontal
Tray
246-017812
Table 4-8. Connectors Used