Operator's Manual

C-5000 Operator’s Manual
150-041102 REV. A Page 18 of 61
Changing Receiver Bandwidth
The receiver bandwidth can only be changed on the manual channel. To change the manual channel’s receiver
bandwidth, do the following.
• Move the cursor under the bandwidth field, as depicted below.
..1 506.987R T.17 FM
S H 509.987T T.17 ..
• Rotate the VALUE knob in either direction. Each turn of the VALUE knob will select the next bandwidth
option in the list. Turn the VALUE knob until the desired bandwidth symbol is displayed. The available
options are as follows.
N – Narrow – 12.5 kHz
S – Standard - 25 kHz
W – Wide – 35 kHz
X – Extra Wide – 70 kHz
UNLESS SPECIFICALLY INSTRUCTED OTHERWISE, ALWAYS SELECT “S”.