Installation Manual

C-5000 COMMUNICATION MANAGEMENT CONTROLLER
INSTALLATION MANUAL
Publication No. 150-041118 Page 4-53
Rev A Section 4 –Electrical Installation
Sep 2001
FLEXCOMM II
COMPONENT
UNIT
CONNECTOR
MATING
CONNECTOR
C-5000
System Interface
Board P500 WED PN
129-214800-01
D-Sub (62 Pin, with backshell and two male
jackscrews), POSITRONICS PN
ODD62F00Y60C-914.1 (129-215344-01)
R/T Board P501 or P502
RT-5000
WED PN
129-217474-01
D-Sub (37 Pin, with backshelI and one each
female and male jackscrews), POSITRONICS
PN ODD62F00Y60C-914.2 (129-217474-01)
FLEXCOMM I, RT-
9600(F),
RT-7200 P50X
WED PN
129-214800-02
D-Sub (62 Pin, with backshell and one each
female and male jackscrews), POSITRONICS
PN ODD62F00Y60C-914.2 (129-215344-02)
RT-5000
J101
J102
J103
PN 129-216657-01 (PT06SE-22-55S-SR)
“TNC” UP
“TNC” Type
“N” Type
“N” Type
AT-50/AT-51
“N” Type
DC Connector, PN 129-217323-01
(PT06SE-12-10S-SR)
FC-50
J1
J2
J3
PN 129-217321-01 (PT06SE-14-19S-SR)
PN 129-217324-01 (PT06SE-8-33S-SR,
3 Pin Connector)
PN 129-214346-01 (PT06SE-12-10P-SR)
AT-400
“N” for RG-58 Right Angle, PN 129-016858-01
“N” for RG-58 Straight, PN 129-016858-02
AT-140
“N” for RG-58 Right Angle, PN 129-016858-01
“N” for RG-58 Straight, PN 129-016858-02
Note: Numbers in parentheses are Wulfsberg Part numbers. Equivalent connectors by
other manufacturers may be substituted.
Table 4-7. Connectors Used