Installation Manual

Page 5-18 Publication No. 150-041118
Section 5 – Configuration and Programming Rev. A
Sep 2001
Enhanced System Features
Phone Patch Mode
The C-5000 can patch into the phone system using both DTMF and pulse dialing. This requires equipment on the
ground, such as a transceiver and an interface box, to connect the base station radio to the telephone lines. This is
NOT a cellular phone.
• From the HOME PAGE, select the radio and channel. Press the MENU button. The following display page
will appear.
←
←←
←
DTMF SELECT PHONE
←
←←
←
PULSE DIALING MODE
• Press the UPPER SOFT KEY to select DTMF dialing, or the LOWER SOFT KEY to select pulse dialing. In
either case, the next display page will appear, and will look similar to the following. This example shows the
dialing operation being performed on radio 1, channel 1.
←
←←
←
SEND 1 ..1
←
←←
←
HOME #-_
• Input the digits you want to dial using the keypad. Alpha characters can be input by turning the VALUE knob
until the desired character is displayed, then pressing the ENTER button. Pressing the ENTER button while a
blank is displayed inputs a ½ second delay. As soon as you begin input, the display will change slightly. The
following depicts a sample entry.
←
←←
←
SEND 1 ..1
←
←←
←
CLR #-12345678*90#
• Press the UPPER SOFT KEY to dial the displayed data, or the LOWER SOFT KEY to erase the displayed data.
• Press the HOME button (LOWER SOFT BUTTON !!!!!!) to return to the HOME PAGE.
Simulcast Operation
Simulcast Mode allows you to transmit simultaneously to two other locations that have radios tuned to different
frequencies. At the same time, the Main RT systems and Guard Receivers are able to receive on their currently
selected channels. You can establish simulcast operation as follows.