User's Guide

GUARD XMT FREQUENCY
1. Set the T/R MAIN/ BOTH/GUARD Switch to GUARD.
2. Any channel may be selected for the Guard frequency
programming operation.
3. Set XMTR RPT/DIR Switch to RPT.
4. Set up the Guard XMT repeater frequency and CTCSS tone
on the thumbwheels. If the unit has the narrow band
modification, set the N/B switch to the desired setting.
5. Operate PRESET Switch to XMT position and hold.
6. Push and release LOAD button. The Guard XMT Repeater
frequency is now loaded.
7. Change the XMTR RPT/DIR Switch to DIR and repeat steps
5 through 7 to load the Guard XMT direct or simplex
frequency. If the guard channel is not configured for talk
around or Repeat/Direct operation, program the same XMT
frequency for both positions of the XMTR RPT/DIR switch.
TONE CODES
CTCSS TONE CODES
TONE
FREQ
HZ
EIA
TONE
CODE
FLEXCOMM
TONE
CODE
TONE
FREQ
HZ
EIA
TONE
CODE
FLEXCOMM
TONE
CODE
67.0 XZ 01 118.8 26 21
71.9 XA 02 123.0 3Z 22
744 WA 03 127.3 3A 23
77.0 XB 04 131.8 36 24
79.7 SP 05 136.5 4Z 25
82.5 YZ 06 141.3 4A 26
85.4 YA 07 146.2 4B 27
88.5 YB 08 151.4 5Z 28
91.5 ZZ 11 156.7 5A 31
94.8 ZA 12 162.2 5B 32
97.4 ZB 13 167.9 6Z 33
100.0 1Z 14 173.8 6A 34
103.5 IA 15 179.9 6B 35
107.2 IB 16 186.2 7Z 36
110.9 2Z 17 192.8 7A 37
114.8 2A 18 203.5 M1 38