Product Specification M4 Lite Tag Version 1.0 MOKO TECHNOLOGY LTD. 1 Copyright © 2022 MOKO TECHNOLOGY LTD.
M4 Lite Tag product Specification V1.0 Revision History Version Data Notes Contributor(s) V1.0 Aug 31, 2022 Initial version Daniel About document This product specification was designed to help users to know the hardware overview and feature instructions of M4 Lite Tag product. Through this document, users will be initial to understand the application scenarios, hardware specifications, basic instructions as well as packaging information of product. 1 Copyright © 2022 MOKO TECHNOLOGY LTD.
M4 Lite Tag product Specification V1.0 Table of Contents 1. Overview............................................................................................................................................... 3 2. Product brief ......................................................................................................................................... 4 3. Application scenarios ...................................................................................................................
M4 Lite Tag product Specification V1.0 1. Overview This Product specification is mainly applicable for MOKO M4 Lite Tag product, and mainly contained below parts: Product brief Application scenarios General specifications Basic instructions Package information For more information about user guidance of product functions and configuration APP, please contact our sales team directly for official document – “MOKO Tag APP User Manual”. 3 Copyright © 2022 MOKO TECHNOLOGY LTD.
M4 Lite Tag product Specification V1.0 2. Product brief Thin, Lite and Unobtrusive! The M4 Lite Tag is a small form factor BLE tag. With breakthroughs in cost, distance and sustainability, this tag shall be the best choice for medical equipment tracking, shopping cart tracking and other asset tracking in various scenarios. Also, M4 Lite Tag has an extremely transmission distance of up to 400 meters based on BLE 5.
M4 Lite Tag product Specification V1.0 3. Application scenarios Healthcare - Medical equipment usage frequency monitoring - Asset theft prevention - Faster positioning of medical equipment in emergency.
M4 Lite Tag product Specification V1.0 4. General specifications 4.1 Hardware specifications Hardware specifications Main chip Silicon Labs BG22 series Bluetooth Bluetooth 5.0 Dimension 36.5mm x 23.5mm x 5.
M4 Lite Tag product Specification V1.0 Software configurations Tag ID 0x00 00 01 Device name MK Tag Trigger switch OFF Table 2: Software configurations of M4 Lite Tag 4.3 Battery consumption Here we have described battery consumptions in some common configurations which refer to different use cases. You can refer to below table to create the use case and estimate battery lifetime.
M4 Lite Tag product Specification V1.0 Purpose: In some working scenarios, it will only need to report the asset status every 1 hour or even longer, to just confirm the assets are in there or anti-theft purpose. Configuration: a) Broadcasting 10s (in case scanning window missed) every 8 hours. b) Adv interval 1000ms during 10s adv durations. c) Motion sensor is not necessary. Lifespan estimation: a) Adv period (average) – 16.7uA b) Sleep period (average) – 3.7uA >>> Whole period (average) – 3.
M4 Lite Tag product Specification V1.
M4 Lite Tag product Specification V1.0 5. Basic instructions 5.1 How to wear/install M4? Figure 2: How to wear/install M4 Lite Tag? 5.2 How to power ON M4? To minimize the size of product as much as possible and suitable for various scenarios, as well to avoid intentional power off actions, the M4 Lite Tag has no reserved mechanical button design. Therefore, we have added “mylar film” to simply power on device.
M4 Lite Tag product Specification V1.0 3) When the LED blinking finishes, put the battery in again within 5 seconds, and then repeat the process four more times, removing and replacing the battery. You should see a LED blinking each time you put the battery in, for a total of five blinking. The fifth blinking is different from the previous four and indicates that the device is factory reset successfully. 1st – 4 th : LED blinking for 2s. This indicates the battery is connected successfully.
M4 Lite Tag product Specification V1.0 6. Package information Figure 5: Packaging information of M4 Lite Tag Item Quantity (M4 device) Quantity (3M sticker) Size Package information Inner box Carton box 40pcs/box 400pcs/carton 40pcs/box 400pcs/carton 306*109*72mm 590*320*160mm Table 7: Package information of M4 Lite Tag 12 Copyright © 2022 MOKO TECHNOLOGY LTD.
M4 Lite Tag product Specification V1.0 FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
M4 Lite Tag product Specification V1.0 © Copyright 2022 MOKO TECHNOLOGY. All Rights Reserved. Any information furnished by MOKO TECHNOLOGY LTD. is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of MOKO TECHNOLOGY LTD. materials or products rests with the end user since MOKO TECHNOLOGY LTD. cannot be aware of all potential uses. MOKO TECHNOLOGY LTD.
