User's Manual
N6207 User manual
Page 33
• All incoming: Reject all incoming calls.
Outgoing calls:
• International: All outgoing international calls cannot be dialed out;
• Local calls: Only local calls can be dialed out;
• All outgoing: All calls cannot be dialed out.
Cancel all
：
Cancel all bar calls. The correct password is needed (The default password is
0000.).
Change password:
• Change restriction password of call: You can change the restriction password provided by
the network.
4.6 Network service
When your mobile phone is roaming abroad, you need to select the network for it to connect the
international GSM network. Generally, you can select the network mode of auto select (see below), or you
also can select to search the available network automatically or manually (see below)
. If you attempt to
connect a network which does not have the valid roaming agreement
you local network, the mobile phone
will prompt” “Network connection failed”.
Automatic：Your mobile phone will search the original network first, and then search through the
network list in SIM card. If there is no available network, any network which has the valid roaming
agreement with your local network will be connected.
Manual
：
Your mobile phone will scan for available network and provide you with the list of current
network. You can select the preferred network, and the phone will prompt such information as successful or
failed during the connection with network.
Preferred network
：
to view the name and ID of current network, tap Back to previous menu；
4.7 My menu
To enter the window of My menu, and tap Option：Replace，list the spare items（11 items most），
select the item desired to add in My menu, tap Select or press OK key to confirm adding（Only Create is
available when My menu is empty.）；In my menu(less than 8 items)，tap Option : Insert before insert
before the item selected；Insert after insert after the item selected；Replace：replace the current item to
another one；Delete：delete the item selected；Delete all：delete all items。
4.8 Connection profile
To set the connection method to visit network, activate Option:
Save as
：
to save the changed connection setting of network as other setting. The system
setting will not be covered, and it will prompt;
Profile
：
to select the connection method to visit network among WAP, MMS and Java；
View
：
to view the name, homepage and bearer type and so on of current connection；
Tap the connection of non-system setting，and then enter the window of connection setting
to complete the following operations：
Profile title：to view or edit the name of profile；
MMSC: look over or edit the number of MMS;
Homepage：to view or change the address of homepage；