User's Manual

N6207 User manual
Page 30
Color style : There are four choices to select, use side up/down key to select view the effect when
setting，finally tap Select or press OK key or tap the corresponding menu, confirm the content needed to
modify. Tap Back to cancel the content selected；
Brightness : to set the background brightness among High, Normal and Power saving，after selecting ,
tap Select or press OK tap the corresponding menu, confirm the content needed to modify。Tap Back to
cancel the content selected；
Backlight time : to set the background Backlight tine among 5 Sec,10Sec,15 Sec,30 Sec and 60 Sec，
tap Select or press OK key or tap the corresponding menu, confirm the content selected。
4.4 Calls
“Calls” is to confirm whether to use the call function or not. When entering the function, it will always
show the practical setting.
4.4.1 Call diversion
“Call diversion” is to transfer calls to the specified phone according to your request.
Within the setting of “Call diversion”, its success depends on network and SIM card. Mobile phone will
prompt the setting properly.
When setting the option, you need to input the correct phone number for correctly transferring the call
to the specified phone. If it is failed, please check the transferred number set in the mobile phone is correct or
not.
Unconditional when the option is set, all calls will be transferred to the specified number;
Busy when the option is set, the incoming call will be transferred to the specified number when your
mobile phone is busy;
No Reply when the option is set, the incoming call will be transferred to the specified number when you
do not answer the call;
Unreachable when the option is set, the incoming call will be transferred to the specified number when
you are not in the service area (For example, when the network signal is not good or the signal environment
is very poor);
Cancel diverts to select the call diversion which is needed to cancel, tap Select or press OK key to
cancel the diversion, press Back key to the return the last menu;
Status to view the diversion status of all current calls.
4.4.2 Call waiting
“Call waiting” is to set whether permitting the call waiting or not. If it is closed, the phone is busy. For
example, when the third part is calling and it hears the busy tone.
4.4.3 Auto redial
“Auto redial” is to set whether permitting to redial automatically or not. Select On the system will redial
when the dialed call does not get through; select Off the system will not redial when the dialed call does not
get through.