User's Manual

N6206 User manual
第 29 页
4.5.1 PIN
On：enable PIN card of SIM card。To power on the phone with inputting PIN code, or dial emergency
call 112。
Off：disable PIN card of SIM card，To power on the phone without inputting PIN code。
4.5.2 Phone lock
This function is to prevent other person from using the phone without permission. After lock the phone,
the password is needed to unlock it. The default is 1234, and you can change it from Settings ->Security-
>Change password.
At once
： select this item, and input the correct password to lock the phone at once ；
Auto：Input the correct password, the phone will lock automatically;
Off：Input the correct password to turn off the phone lock。
4.5.3 PIM
PIM protect is the Personal Information Manager code. You must enter this code before you access
important personal information such as Phonebook, Messages, Call History, My favorites, Schedule and
notepad so that it can prevent others from viewing the information without your authorization. The default
setting of PIM code is 1234.
On/Off ：When PIM code is on, you are prompted to enter the code if you want to view any personal
information. When PIM code is off, you do not need to enter the code when viewing personal information
and the information will not be protected.
Protected items
： to set the protected items, and the correct password is needed。Enter the screen of
protected items, tap the items for protection then tap OK to confirm the setting, and the system will prompt.
4.5.4 Change password
PIN: modify PIN password；
Phone/PIM
： modify phone/PIM password。
4.5.5 Bar calls
The network operators will provide you with a 4-digit password （0000）to enable or disable this
function.
Incoming calls:
• When roaming: Reject all incoming calls when roaming.
• All incoming: Reject all incoming calls.
Outgoing calls:
• International: All outgoing international calls cannot be dialed out;
• Local calls: Only local calls can be dialed out;
• All outgoing: All calls cannot be dialed out.
Cancel all
： Cancel all bar calls. The correct password is needed (The default password is
0000.).
Change password:
• Change restriction password of call: You can change the restriction password
provided by the network.