User's Manual

N6206 User manual
第 25 页
4 Settings
4.1 Phone
“Phone” is to set the service status of mobile phone, which includes Receiver volume, Date & Time,
Language, USB mode and Auto key lock.
4.1.1 Receiver volume
Press side up/down key to increase or decrease the receiver volume. The key position refers to the
picture within section 1.4。
4.1.2 Date & Time
To set the time, date and corresponding format, use side up/down key to select the content, or tap the
content needed to modify to enter the corresponding window for modification：
Show clock：time displays in the idle；
Local time：local time displays in the idle；
Remote time：remote time displays in the idle；
Time format
： to adjust the format of the time;
Date
： to input the correct date;
Date format
： to set the format of the date.
Time zone：enter the window of “World clock” to set the current time zone。
4.1.3 Language
In the window of “Language”, there are two choices namely simplified Chinese and English，use side
up/down key to select view the effect when setting，finally tap Select or press camera key or tap the
corresponding menu, confirm the content needed to modify；tap Back to cancel the content selected。
4.1.4 USB mode
There are two choices：Modem mode and U Disk mode；
Modem mode
： startup the multifunctional connection mode, or the system only can be used as
modem，at the moment, U Disk mode is invalid。
U Disk mode：startup U Disk mode, the phone can be used as U Disk, at the moment, Modem mode is
invalid；
Note: the setting and power off is needed for mode switch. After the phone resets, the new mode will be
valid, and the system will prompt.
4.1.5 Auto key lock
Using this function, the phone screen and key will lock automatically after each power on。On/Off：to
set Auto key lock on/off；Auto lock time：to set the time of Auto key lock among 10 sec、30 sec、60
sec。