User's Manual

NEC N8605 User Manual
第 19 页
fully charged. Li-ion batteries are particularly affected by temperatures below 0 °C (32 °F).
Do not dispose of batteries in a fire. Dispose of used batteries in accordance with local
regulations.
 Battery usage
The phone idle duration provided by the manufacturer is based on the ideal work environment. In
the practice, the work duration of battery will vary with the different network state, work environment
and use mode.
 Indication of battery capacity
When the mobile phone powers on, the level of battery capacity displays on the top left corner of
the screen. The residual power capacity is represented by indication bars from one to four levels.
1.3.1 The disassembly and installation of battery
 When dissembling, make the mobile phone back face upward, and press down the button on the
top of mobile phone, then take out the back cover. Lift the top of the battery upward and take it
out.
 When installing, insert the clip at the top of the battery into the corresponding clamping slot in the
phone and press the battery downward, then install the phone’s back cover.
1.1.13. Battery charging
 Insert the adapter of the charger into the plughole of mobile phone;
 Connect the charger with the power. At this moment, a sign of battery will sparkle indicating the
battery is charging;
 When the charging sign is static (and a sound), which means the charging is completed. During
the charging, the battery, mobile phone and charger will become heated, which is normal
phenomena;
 After the charging completed, disconnect the power and pull off the charger.
Warning: When charging, the phone must be placed at the site with the temperature between －5 ℃
and 55 and use the charger from the provider. When using the charger without permission, it is ℃
possible to result in danger, moreover violate the permission and terms of warranty for mobile phone.
1.1.14. Power on/off
Under the status of phone power off, long press Pwr key to turn on phone, then the starting
animation appears.
In the status of power on, long press Pwr key to turn off phone.
1.1.15. Function table of menu
Message
Call log