User's Manual

N5603‘s usermanual
第 35 页
♦ Only CSD: only use CSD
CSD setting: modify CSD connection setting, select desired setting and press select to
access the related window:
♦ Connect type :to set connect type ,allow to select ISDN an
analogue ;
♦ Dial-up number: dial it and access to network
♦ User name: user name of network
♦ password: user password of network
GPRS setting: modify CSD connection setting, select desired setting and press select to
access the window:
♦ APN: access point name of GPRS gateway
♦ User name: user name of network
♦ password: user password of network
DNS Setting :input the DNS address (is just the same with GPRS Mode).
4.8 Calibration
When you fell the use the touch pen to touch the screen do not nicety ,please calibration the screen to
insure the screen make the right reaction .Do as the system clew .
4.9 Reset
4.9.1 Reset settings
The option may resume all original factory values. After selecting the option, the mobile phone will prompt
you “Are you sure to resume the factory setup”. When using the option, it do not clear the materials that you
have saved by yourself such as phone book, short message, and so on. You may only change the operating
environment setups of mobile phone such as selecting rings, scene mode, etc.
4.9.2 Reset all
The option may resume all original factory values. But it will clear the materials you have saved such as
phone book, short message, and so on. The detailed operation is the same as Resuming Setup.