Operation Manual

1、There may be label paper on the upper cover
detector, leading to a failure to detect the paper.
2、There may be label paper on the print head,
leading to a failure to detect the paper.
3、The size set by the template may not be
consistent with the actual size of the label paper.
4、The set paper type of the template may be wrong.
5、The paper case baffle may not be installed or
the paper case baffle may not be installed in the
correct place.
6、Detector failure may be leading to continuous
paper delivery.
A：
1、The label paper is not NIIMBOT paper and may
be chipless.
2、The actual printed quantity exceeds the
quantity required by the chip, and the self-check
page can be viewed.
3、Chip fault.
4、Machine fault.
A：




15