User manual

User Manual
Introduction
This publication provides the necessary information required to safely operate the
MobIR
®
M4 Thermal Camera.
Compared with previous ones, this edition has been revised according to camera
modification, such as the extended temperature range up to 250℃, the alternative
for switch between Celsius and Fahrenheit, the background modification function, etc
It is important to fully check all equipment with which you have been supplied
The equipment should be used, maintained and serviced by suitably trained
personnel, capable of carefully following the procedures and guidelines given in this
User Manual
All User Manuals and leaflets should be read thoroughly before proceeding with
operation of the equipment
It is also advisable that all User Manuals and Instruction Leaflets supplied are kept
readily available, for reference when the equipment is in general use
Precautions
The following precautions must be adhered to at all times and must be considered in
addition to any advised precautions issued at the relevant worksite or work area
• Do not direct the MobIR
®
M4 Thermal Camera at very high intensity radiation
sources such as the sun, carbon dioxide lasers or arc welders etc
• Always replace the lens cap when the unit is not in operation
• Do never point the MobIR
®
M4 Thermal Camera at high-temperature object
when switching on
• Wait for 10 seconds or longer to restart the camera after turning it off
• Keep the MobIR
®
M4 Thermal Camera steady when operating on it
• The MobIR
®
M4 Thermal Camera shall work between -10 and +50℃℃
• When the MobIR
®
M4 Thermal Camera is not in use or is to be transported,
ensure that the unit and accessories are stored in the protective carry case
• The MobIR
®
M4 Thermal Camera incorporates precision optical equipment and
static-sensitive electronics which should be protected from shock and vibration at
all times
• Do not jam the air vent on the MobIR
®
M4 Thermal Camera body
• Do not attempt to open the camera body, as this action will void the warranty