User manual

User Manual
• Do not short circuit the battery by directly connecting the metal terminals
• Ensure that no metal objects touch the battery terminals
• Do not direct the battery at bright sunshine or put the battery in an over-heated
environment
• Always remove the battery from the equipment or charger when it is not in use.
Store the battery in a cool, dry place
• All rechargeable batteries gradually lose their charge over time when they are left
in storage. If the battery is to be left in storage or for a period of non-use, a 'top-off'
charge should be carried out prior to use
• Do stop using the battery when it heats abnormally or emit peculiar smell or
distorts
• If liquid in the battery splashed into your eyes, please wash your eyes with fresh
water flush immediately and go to see a doctor
Live Video Output
Composite video output (PAL) option is available in the camera. With this option you
can view the live image captured by the camera on a monitor or a recording device.
Before trying to use this option, ensure that the camera is switched off.
• Properly connect the camera to the monitor (or recording device) with the video
cable supplied together with the camera
• Power on the monitor
• Power on the camera
• Enter the submenu Analysis under menu Setup, choose option Video Output and
set its value to be ON
• Press button M or Ok to save the setup and return to the live image
• Live image is available in both the LCD screen of the camera and the monitor (or
recording device)
• Power off the camera, monitor (or recording device) and disconnect the cable