User manual

User Manual
Battery Charging
Two methods are available to charge the battery.
• Charing in an external battery charger
• Charging in the imbedded battery charger
Charging in an external battery charger
• Insert the battery into the battery charger
• Connect the charger plug to a wall outlet (96-250VAC)
• The charge lamp (orange) will light and charging will begin
• When the charge lamp changes to be green, normal charge is completed.
• If there is something wrong during charging, the charge lamp will change to be red
• Once the battery is fully charged it can be used with the camera
• The approximate charge time is 300 minutes for normal charge and 360 minutes
for full charge
Charging in the imbedded battery charger
• Connect the 5VDC plug of AC adapter (96-250VAC) to the converter supplied with
the AC adapter
• Insert the USB plug of the converter into the USB interface of the camera
• Connect the AC adapter plug to a wall outlet (96-250VAC)
• The charging will begin and the white indicator light under the outer screen of the
camera will blink
• When the white indicator light shines steady, the battery is fully charged
• The approximate charge time is 360 minutes for normal charge and 420 minutes
for full charge
Note:
y When charging the battery in the imbedded battery charger, Button
Power is unavailable
y Charging time may vary from the battery condition or the environment
temperature
y It is normal that battery and the charger get heated during charging
process.
Additional Information
• The battery shall be charged in temperature between 0℃ and +45℃
• Never dispose the battery to fire or try to heat the battery
• Do insert the battery with the terminals connected to correct polarity