User manual

User Manual
Sub Menu Default
• Camera setup parameters remain the same after re-powering on the camera. But
they can be resumed to be the factory configured ones.
• Press Button “Menu” or “＞” to enter the option “Setup”. Press Button “ ” to ∨
highlight “Default”
• Press Button “Menu” or “OK”. Then a NUC is performed automatically.
• After NUC, all the parameters become the factory configured ones.
Menu Analysis
• Press Button “Menu” to bring up the main menu. Press Button “ ”and“ ” to ∧∨
highlight the menu “Analysis”
• Four sub menus Spot, Line, Area and Isotherm are available
Sub Menu Spot
• Spot analysis is merely available on frozen / saved images.
• Press Button “Menu” or “＞” to enter the option “Analysis”. Press Button “ ” to ∨
highlight “Spot”, select by pressing Button “Menu” or Button “OK”
• Five spots are shown on the screen, among which four are marked as A, B, C,