User manual

User Manual
Menu Setup
• Press Button “Menu” to bring up the main menu. Press Button “ ”and“ ” to ∧∨
highlight the menu “Setup”
• Four sub menus are available: Analysis, Target, Time and default
Sub Menu Analysis
• Press Button “Menu” or “＞” to enter the option “Setup”. Press Button “ ” to ∨
highlight “Analysis”
• Press Button “＞”to go to the Analysis option, select by pressing Button “Menu” or
“OK”.
• Press Button “ ” and “∧∨” to switch between each option. Press Button “＜” and
“＞” to alter the setting of highlighted option.
• Options below are available: Iso Color, Mul Spot/Area, Area, Menu Trans, Date
Bkgrd, Laser, Audio Alarm, Voice Annotat, Temp Unit and Mean.
• Iso Color: 3 colors black, white and green are available for the isotherm
• Multi Spot/ Area: To toggle between one and four spots/ areas. Four movable
spots and areas are available for simultaneous analysis by setting “on”. Only one
spot and no area is present in the “off” position
• Area: To make the four moveable areas to display the Maximum, Mean or
Minimum temperature under area analysis.
• Menu Trans: 5 grades of transparency are available for the menu display
• Data Bkgrd: To turn on or off the data background. If Data Bkgrd is set as “on”,