User manual

User Manual
Quick Start Guide
• Ensure that the battery is fully charged
• Power on the MobIR
®
M4 thermal camera
• Open the top half of the MobIR
®
M4 thermal camera
• Wait for 15 seconds and uncover lens cap
• Non Uniformity Correction (NUC) is performed automatically after switching on
• Aim the MobIR
®
M4 Thermal Camera at the object
• Rotate the aperture and adjust the focus to get clear image
• Press Button “●” for three seconds to switch between Auto and Manual mode
• Press Button “●” and release it instantly and then adjust brightness, contrast and
palette if necessary
• Press Button “<” to view visual image of the target
• Press Button “<” to return to the live thermal image
• Press Button “OK” to freeze the live image.
• Press Button “OK” again to store the frozen image
• Press Button “C” to resume the live image.
Quick Reference Table
ABBREVIATION SIGNIFICANCE
On/ Off Button Power
M Button Menu
Λ Button Up-direction
v Button Down-direction
< Button Left-direction
> Button Right-direction
OK Button Confirm
C Button Cancel
● Button ●
Left To lighten the outer screen
Right To lighten the outer screen