User manual

IR518 Thermal Imager User Manual

Chapter 7 Battery Status

IR518 thermal imager is power supplied by 4 units of replaceable and rechargeable Ni-MH AA

batteries, average operation time is 2 hours.

7.1 Battery charging method:

1) Aim the batteries electrode to the charger’s electrode, and insert the battery into the

charger. Please pay attention to the inserting direction and position

2) Insert the 100-240VAC/9VDC adaptor plug into the AC charge socket. Connect the

AC adaptor cable to the 100～240VAC socket to start charging

3) When start the charging, the red and blue indicator will flicker alternatively.

4) In the process of charging, the red indicator is lightening, when fully charged, the blue

indicator is lightening.

5) It’s normal that the AC adaptor will get heat during the charging process.

7.2 Precautions.

1) The batteries cannot be taken out of the camera in the charging process.

2) Please ensure batteries are fully charged and discharged at the first 3 times

3) Please choose qualified rechargeable batteries and battery charger supplied by the

camera supplier.

4) Please charge batteries when the ambient temperature is between 0℃ to 40℃

5) Do not mix new batteries and old batteries together to operate the camera

6) Do not mix batteries of different types together to operate the camera.