User manual

User Manual

Select the icon Save command,
then the frozen image with voice annotation and text annotation (if any) will be saved into the memory
media, with file name “IR******” displayed in the status bar on image screen.
 Frozen images (with or without annotation) are saved as JPEG files in the memory media. After saving an image, the camera will switch to
live thermal image status.
 To exit the annotation toolbar at any time, select the icon Exit command or press button M. Then the toolbar will disappear. Press button C to
exit the frozen image and return to the live thermal image status.
 If the SD memory card or the built-in flash memory is fully filled with images, the respective prompt “SD full” or “Storage full” will appear in
the status bar under the image screen when you try to store a new image. If failing to save an image, the prompt “Save error” will appear in
the status bar under the image screen.
Option Palette
 Click option Palette or the palette bar on the right side of the screen directly with the touch pen or press button “Up” and “Down” to highlight it
and then press “Menu” to select it. The Tmax/Tmin bar will appear on the screen.

Use touch pen can adjust the value of Tmax/
Tmin directly or press button “Up” and “Down” to adjust the value of Tmax and “Left” and “Right”
to adjust the value of Tmin.
 Click the palette bar again with touch pen or press “OK”/“Menu”/”C” can enter into palette adjustment keyboard, then use touch pen to select
applied palette from 8 different palettes or press button “Left” and “Right” to highlight the applied palette and then select by “OK”/”Menu”.
37