User manual

User Manual

The tool bar at

the bottom of the screen is to adjust the transparency of the fusion part. Press button Left or Right to adjust its value and to

change the transparency from 0 to 100%. The area size won’t change.

To turn off this function, bring up the main menu, select option Pic Mode under submenu Function either by the touch pen or by pressing OK,

and then set its value to be OFF. Save the setup and exit the menu. Now this function is inactive.

When this function is inactive, pressing function button Pic Mode will switch between the two modes Thermal image alone and Visual image

alone

 Choose button OK or press the button M to save the change; choose button Cancel or press button C directly to cancel change. Then the

dialog box will be closed and the original image status will be resumed.

Option Setting

 Click option Setting with the touch pen or press the button OK to select it. Then the Default dialog box appears on the screen.

 V

deo Freq: To set the video frequency of the camera

 Image Arith: To set infrared image quality of the camera

 LCD BLight: To set LCD back light time of the camera

 KEY BLight: To set light time of the button on the keyboard

 Y/M/D: To set date for the camera. After setup, date of the camera will automatically update.

 H/M/S: To set time for the camera. After setup, time of the camera will automatically update.