User manual

User Manual

 Clicking each option box with the touch pen or pressing button OK can toggle between the options. Clicking each value respectively with the

touch pen or moving the button up or down can alter values of the option.

 Laser: To turn on or off the laser locator.

 Image Interval: To set the value of Image Interval to be 15sec, 30sec, 60sec, 5min. Then the camera will start capturing image every 10

seconds or 5 minutes as per the value you set.

 PowerAlarm: To turn on or off the power alarm function. If setting On, the power alarm will sound every one minute when the battery is to

use up.

 Auto Off: To turn on or off the auto turnoff function. Never means the camera will never turn off automatically during working; 10Min, 30Min

or 60Min means the camera will automatically turn off if there is no operation on it in successive 10 minutes, 30 minutes or 60 minutes. No

operation indicates in live or zoomed images there is no click on the VGA LCD screen, no operation of joystick or buttons, and no menu or

dialog box displayed in the screen.

 Histogram: To display or close histogram of live, frozen or saved images.

 Pic Mode:

This function is available in live or zoomed or frozen or saved images.

Bring up the main menu, select option Pic Mode under submenu Function either by the touch pen or by pressing button OK, and then set its

value to be ON. Save the setup and exit the menu. Now this function is activated.

Press function button Pic Mode and release it inst

antl

y to switch among the three display modes: Thermal image alone, Visual image alone

and Fusion picture.