User manual

User Manual
22
USB driver for the camera has been successfully installed in the PC.
• Power on the camera.
• Press the softkey labeled “File” to reveal the menu “Storage”.
• Press the softkey labeled “↑” and “↓” to select “Storage”, and “OK” to confirm.
• Press the softkey labeled “UFlash” to select the storage medium as UFLASH. Press the softkey labeled “SD Card”
to select the storage medium as SD Card.
• If the storage medium is set as “UFLASH”, no hint will display on either the PC or the EASIR
TM
-4 screen. Image
export, image analysis, live video recording etc. can be done in the PC. Images saved in UFLASH can be
transferred to PC via IrAnalyser.
• If SD card is inserted in EASIR
TM
-4, the PC will identify the EASIR
TM
-4 as a removable hard disk, you can copy the
saved data to PC or delete them from the card, or even format the SD card and etc. But you cannot operate on it in
the Guide IrAnalyser software.
• If without SD card in EASIR
TM
-4, you have to install the camera USB Driver to PC, and use the Guide IrAnalyser
software to transfer images to PC.
Install USB driver to PC
When there is no menu in the live thermal image, properly connect the USB interfaces of the camera to a USB2.0 port
of your PC with the USB extension cable.
Microsoft® Windows launches a Found New Device Wizard to guide you to install the driver as follows:
 Choose “Install from a list or specific location (advanced)” and include the folder where you save the driver program.
Then Click button next to go further.