User manual

User Manual
19
Setup Command
Use this command to set a directory on the hard disks to store the infrared video, capture image and set other relevant
information.
Film: set the directory path to save the video recording
Capture Saved: set the directory path to save the captured image
Frame Rate: set the frame of thermal image per second. The default value is 25/ second
Kinescope Rate: set the frame of thermal video. The default value is 1 frame.
Update track view: update the interval between track circles
Default Palette: set the palette to be used for the infrared video
After saving the setup, the program will automatically go to the directory when opening infrared video and perform the
track circle
Menu Bar
Menu bar consists of seven sub-menu options, including File, Video, Measure, Tools, View, Window and Help.
Keeping left button of the mouse depressed and moving the mouse will allow you to move the menu bar to any desired
place.