User manual

User Manual
10
charging process should be stopped. This phenomenon is normal; you can wait till the battery turns to be lower
then continue the charging process.
 Please ensure batteries are fully charged and discharged at the first 3 times.
 Please choose qualified rechargeable batteries and battery charger supplied by the camera supplier.
 Please charge batteries when the ambient temperature is between 0℃ to 40℃.
 Do not mix new batteries and old batteries together to operate the camera.
 Do not mix batteries of different types together to operate the camera.
 AA Alkaline batteries are not chargeable.
 Insert batteries according to “+”, “-“ markers.
Buttons Introduction
There are three functional buttons of EASIR
TM
-4（From left to right, they are ， and ） and a
trigger button T.
Power on /off the camera
The input voltage is 12V，keep button
depressed for more than 3 seconds to power on. When powering off,
keep button
depressed until the switch off bar runs fully.
Focus
When there is no menu on the screen, press button
to enter focus menu, the following info will be displayed on
the screen：
Far Near Auto
According to menu navigation, press button
to focus far; press button to focus near; press button
to auto focus. Press button T to exit the focus menu. When doing auto focus, please keep the camera steady
to ensure image quality.
Auto/manual mode switch
When there is no menu on the screen, keep button
depressed to switch between the manual mode and
automatic mode.
AutoSpan ManualSpan