EasIRTM-4 Thermal Camera User Manual Wuhan Guide Infrared Co., Ltd. No. 26 Shucheng Rd, Hongshan District, Wuhan 430070 P. R. China Telephone: +86-27-8767 1991 Facsimile: +86-27-8767 1927 Email: overseas@guide-infrared.com Internet: www.guide-infared.com © Wuhan Guide Infrared Co., Ltd.
The Quality Management System of Wuhan Guide Infrared Co., Ltd. is approved to ISO9001:2000 for the design and manufacturing, stockholding, in-house repair and site servicing of non-contact temperature measuring instrumentation. Wuhan Guide Infrared Co., Ltd. reserves the right to make changes and improvements on any of the products described in this manual without prior notice. EASIRTM-4 Thermal Camera complies with current European directives relating to electromagnetic compatibility and safety.
Table of the Contents Table of the Contents ................................................................................................ 1 Introduction ............................................................................................................... 1 Precautions ............................................................................................................... 1 Maintenance ........................................................................................................
User Manual Introduction This publication provides the necessary information required to safely operate the EASIRTM-4 Thermal Camera. It is important to fully check all equipment with which you have been supplied. The equipment should be used, maintained and serviced by suitably trained personnel, capable of carefully following the procedures and guidelines given in this User Manual. All User Manuals and leaflets should be read thoroughly before proceeding with operation of the equipment.
User Manual Maintenance To ensure that the EASIRTM-4 Thermal Camera is kept in good working condition and remains fully operational, the following guidelines should be adhered to at all times. Non-optical surfaces The non-optical surfaces of the camera can be cleaned when required, with a soft cloth dampened with water and a mild detergent. Optical surfaces The lens of an IR camera is very expensive. Replacement or repair may be thousands of dollars.
User Manual address: overseas@guide-infrared.com System Overview TM EASIR -4 is a new infrared camera of Guide infrared, breaks the IR world with its lowest price and high performance. Designed for tough work environments and entry-level users, EASIRTM-4 is far more robust and shock-resistant for any tough working environment and it is easy to operate and allows for the learners to operate without being trained and take the inspection work easily with one hand .
User Manual Imaging Performance THERMAL Detector type: Uncooled FPA microbolometer (160× 120 pixels, 25μm) Spectral Range: 8-14μm Thermal Sensitivity: ≤100mk at 30℃ Field of View/ Focus: 20.6° X 15.5°/ 11mm Focus: Automatic or motorized VISUAL Built-in Digital Video: CMOS Sensor, 1600x1200 pixels, 224 true colors Image Presentation External Display: 3.
User Manual Environmental Specification Operating Temperature: -10℃ to 50℃ Storage Temperature: -20℃ to 60℃ Humidity: Operating and storing 10% to 95%, non- condensing Encapsulation: IP54 IEC 529 housing Shock: Operational: 25G, IEC 68-2-29 Vibration: Operational: 2G, IEC 68-2-6 Interfaces USB 2.0: Image（thermal & visual）, measurement, and voice transfer to PC; Live video transfer to PC Physical Characteristics Weight: 0.
User Manual support image information read-in, Powerful powerful further analysis, live trend analysis analysis, multipage generation by software over 9 IR images, real-time video analyzes the image with the help of various analysis method and generate report.
User Manual realizes video transfer and operation control. USB 2.0 Realtime image, video data transfer User can record or just monitor the IR sreams on to PC and real-time control of the his PC screen - very powerfull for online camera on PC monitoring of example print circurts QC. And other LAB jobs. special for fever sensing, and veterinary Medical edition the accuracy can arrive 0.
User Manual Parts Described 1 LCD Display 2 Charging Indicator 3 Function Softkeys 4 Microphone 5 Battery Cover 6 Speaker 7 Visual Camera 8 Laser 9 IR Lens 8
User Manual 10 Trigger Button 11 USB Interface 12 Video Interface 13 AC Adapter/Charging Input Terminal 14 SD Card Slot EASIRTM-4 Charging Instruction Note: “slow flicker” in the text is about 1 time per second, “quick flicker” is about 3 times per second. How to use the adapter The red indicator light will turn on when the adapter is connected with camera. Keep press the button for 2 seconds to power on the camera with the green and red light flicker alternatively.
User Manual charging process should be stopped. This phenomenon is normal; you can wait till the battery turns to be lower then continue the charging process. Please ensure batteries are fully charged and discharged at the first 3 times. Please choose qualified rechargeable batteries and battery charger supplied by the camera supplier. Please charge batteries when the ambient temperature is between 0℃ to 40℃. Do not mix new batteries and old batteries together to operate the camera.
User Manual Enter PIC mode to enter PIC mode, the following info will be displayed on When there is no menu on the screen, press button the screen ： Visual Spot Fusion Spot analysis In the PIC mode, press button to enter spot analysis mode ↑ ↓ Left/Right ← → Up/Down - Press button to switch between the X or Y coordinate of the spot - Press button or button to adjust the value of X or Y’s coordinate.
User Manual without shutter Image frozen and save When there is no menu on the screen, press button T to freeze the image, the following info will be displayed on the screen: Save Voice Visual /IR Press button T again to exit frozen mode and return to the real-time IR mode Press button to save the image and return to live thermal image Voice Annotation In the frozen mode, press button to add voice annotation, the following info will be displayed on the screen： xx s Record Stop Play Pres
User Manual In the main menu mode, press button to enter sub-menu parameter setting: Emiss Tamb Distance Palette RelHum Laser ↑ ↓ In the sub-menu Parameter, press button OK to confirm the highlighted option and enter the next sub-menu, press button T to return to real-time IR mode.
User Manual Function operation Thermal camera focusing There are two methods to adjust focus: motorized and automatic To motorizedly focus: Aim the lens at the target Press Press the softkey labeled “Far” and “Near” until the image on the LCD is as clear as possible to activate the menu To automatically focus: Aim the lens at the target Press Make sure the target is in the middle of the LCD, and then press the softkey labeled “Auto” until the image on the to activate the menu LCD
User Manual Press button to enter Manual mode and to adjust Tmin and Tmax manually. + - Tmin + - Tmax to increase the Tmax value, press button Press button to decrease the value, press button to switch between Tmin and Tmax adjustment mode. to enter Auto mode and Tmin and Tmax will adjust automatically according to the change of Press button scenery.
User Manual To delete the selected image: Press the softkey labeled “Delete”, Press the softkey labeled “Yes”. To delete all the images in SD card: Press the softkey labeled “File”, Select “Del All” by pressing softkey labeled “↑” and “↓”, and “OK” to confirm. Press the softkey labeled “Yes”. Voice Annotation Voice annotation can only be added before saving an image. When freeze an image, the Image Capture menu appears.
User Manual Relative Humidity: To set relative humidity percentage value between 0 and 100 according to the practical environment. Video Output Composite video output (PAL or NTSC mode) option is available in EASIRTM-4. With this option you can view the live image captured by the camera on a monitor or a recording device. Before trying to use this option, ensure that the EASIRTM-4 camera is switched off.
User Manual PC System Requirements Operating system: Window 2000 or higher (IE5.0 or higher) Software: Microsoft® Office 2000 or higher Hardware: Processor Pentium 4 2.4G or Above RAM At least 512M Others Independent Graphic Card Using commands for infrared video analysis After connecting the camera of EASIRTM-4 to the PC and operate the IR Analyser, you can use the relative commands to do all kinds of analysis and remote control the EASIRTM-4.
User Manual Setup Command Use this command to set a directory on the hard disks to store the infrared video, capture image and set other relevant information. Film: set the directory path to save the video recording Capture Saved: set the directory path to save the captured image Frame Rate: set the frame of thermal image per second. The default value is 25/ second Kinescope Rate: set the frame of thermal video. The default value is 1 frame.
User Manual File Menu The File menu offers the following commands: Open Image Open an existing image file or infrared video Close Close an opening image file or infrared video Setup Set the directory where to store infrared video and relevant information Exit Exit the Guide IrAnalyser® program Video Menu Palette command Select a palette for the current infrared video. Nine palettes as follows are available.
User Manual The following command is available if the camera connected with PC via USB 2.0 is EASIRTM-4. Calibration (F2) Send calibration command to the camera Near Focus (F3) Press F3 continously to adjust near focus, stop adjusting by releasing the bottom Far Focus (F4) Press F4 continously to adjust far focus, stop adjusting by releasing the bottom Video capture command When playing infrared video, use this command under Video Menu or Press Ctrl + T to capture the current image.
User Manual USB driver for the camera has been successfully installed in the PC. • Power on the camera. • Press the softkey labeled “File” to reveal the menu “Storage”. • Press the softkey labeled “↑” and “↓” to select “Storage”, and “OK” to confirm. • Press the softkey labeled “UFlash” to select the storage medium as UFLASH. Press the softkey labeled “SD Card” to select the storage medium as SD Card.
User Manual Installation starts. When getting to the step as shown below, choose “Continue anyway” to proceed further. Installation continues and finishes quickly. Click button Finish.
User Manual Go to Device Manager to check and confirm whether the driver has been successfully installed. If there is “GUIDE EASIRTM-4” listed under Universal Serial Bus Controller, it indicates the driver has been properly installed and you can transfer data from the camera to PC now.
User Manual 25
