Quick Start Guide

When charging, please unplug the USB cover at the bottom of the
thermal imager, insert the matching TypeC USB charging cable, and
plug in the power, and then the charging begins.
Chargingspecifications:5V,2A
Charging indicator is red during normal charging
Charging indicator is green when charging is complete
Note : When charging after the device is powered on Charging when
power on Indicates that the external power supply is supplying
power to the device to ensure normal operation, but is not charging
the battery Indicates that the external power supply is also
charging the battery while powering the device to ensure normal
operation.
Video output
There is a video output port beside the USB interface on the side of
the thermal imager, and the external video is always in the state of
power on.
The image of the thermal imager can be output to the external
screen through the matching HDMI video cable. There are two
display modes, namely the external screen and the screen of the
device, but only one mode can be selected!
Note: When HDMI is used to connect the external display screen, the
real-time screen can only be viewed by the external display. There is