Users Manual

S35 Quick Start Guide S35 Quick Start Guide
INTERFACES FOR WHOLE UNIT
· Images from the thermal imager can be out put and displayed on
the externally connected monitor via supporting video lines of
Ramo interface.
REMARKS: Video lines are optional accessories!
BATTERY INDICATOR
· When the thermal imager is powered on, the battery indicator will
display in the upper right corner of the screen as the battery capacity
levels changes. The alight part of the battery indicator indicates the
remaining capacity.
High capacity Medium-high capacity Medium capacity
Medium-low capacity Low capacity Scarce capacity
· After power-on and entering a real-time image, the previous battery
capacity levels shall be displayed in the upper right corner of the screen.
ATTENTION:
① Replace the battery while the power is low!
② In the use of a rechargeable battery, the battery will be full
for a longer time, that is, time for switching from
to
will be longer than that for switching between other
battery capacity levels!
FOCUSING RING
· After the thermal imager is powered on, the image may be blurred
when the distance to the observed target changes. And the lens
focusing ring shall be turned to refocus until the target image is clear.
MENU BUTTON
· Scene Modes: When power is on and the menu is not called out,
click to switch the ve scene modes of Forest / Desert / City / Snow
/ Default.
Forest Mode: Desert Mode: City Mode:
Snow Mode: Default Mode:
· Conrmation:When power is on and the menu is called out, click
the Conrm to save the current settings and return to the previous/
exit menu at the same time.
· Cancel: When power is on and the menu is called out, long press to
cancel the current settings and return to the previous/exit menu at the
same time.
· Menu Bar: When power is on and the menu is not called out, long
press to enter into the menu bar.
· Exit : To exit menu bar.
· Screen brightness : To adjust the grade of screen brightness.
Grade 1-10 is adjustable.
· Compensation : To set a/an automatic compensation / scene
compensation / shutter compensation, three types of compensation.
Automatic Compensation: Scene Compensatio:
Shutter Compensation:
Attention: Cover the lens cover when in scene compensation!
· Video Output : To open/close video output; when the video
output is on, a will be displayed in the lower right corner of
screen.
· P/N system : Video system can be switched to P system/N
system.
Attention: Successful P/N system switch requires a restart of
thermal imager.
· Hot point track : A switch can be set, and when hot point track
is on, cursor will track the point with the highest temperature in
the scene.
·
·
·
·
· Time for auto sleep: Click to set a time for auto sleep, during
which if no operation is carried out, it will enter into a sleeping mode.
Optional: No auto sleep , auto sleep for no operation within
5minutes / 10minuts /15minutes ;
To cancel auto sleep: Press any button to wake the sleep after
sleeping.
· Time for auto power-off : Time for auto power-off can be set,
during which any operation will stop it from entering an auto power-
off mode;
Optional: No auto power-off , auto power-off for no operation
within 15minutes / 30minuts /60minutes ;
· Restore default : To select whether to restore the default valve
or not. Select “yes” to restore all the parameters to factory settings;
select “no” to cancel the operation.
· Contrast : The grade for image contrast can be adjusted and
grade 1-10 is adjustable.
· Brightness : The grade for image brightness can be adjusted and
grade 1-10 is adjustable.
Remarks: In partial scene mode, the vaule of contrast and brightness
adjustment are saved under the currently selected scene mode.