User guide

PH802 User Guide
Network Status Icon: ON when Phone work on PPPoE mode and FLASH when PPPoE is not
registered successfully. OFF when Phone is work on another mode.
Message Status Icon: ON and Flash if Phone has new message include text message or
voice record
Missed call display ON and Flash if Phone has missed call and not be read.
SIP1 (Public SIP server) register State: Flash when enable register and can not register
successfully; ON when enable register and register successfully; OFF when disable register
SIP2 (Private SIP server) register Status Icon: Flash when enable register and can not
register successfully, ON when enable register and register successfully, OFF when disable
register
Handset Status Icon: ON when off-hook OFF when on-hook
Hand-free Status Icon: ON when phone work on hand-free mode OFF when IDLE or work on
handset mode
Weekday Status Icon: Show the correct weekday according to the phone current date
Numerical Numbers and Characters: 0 - 9 * # @ A, B, C, D, E, F, G, H, I, J, K, L, M, N,
O, P, Q, R, S, T, U, V, W, X, Y, Z
4. Register via Web
Login the WEB page via Wan port or LAN port IP after connecting IP PHONE well. The default username
and password are both ”admin”
Configure via LAN port:
A, Connect the PC with IP PHONE LAN Port, ensure LAN port IP is 192.168.10.*
B, The default IP is 192.168.10.1, PC can login
http://192.168.10.1 to configure
Configure via WAN Port:
A, Check WAN port IP address by the key ”SYSINFO” in the panel of IP PHONE
B, Input the IP phone’s IP address, login in the WEB page, the default user name and password are
all “admin”
Wuchuan Network Tech Co., Ltd
www.5111soft.com
7