User guide

PH802 User Guide
While dialling numbers, press this key Cancel a number
6 DEL
Enter the configuration mode, modify the
configuration parameters, press this key
Delete the inputted configuration parameters
7 HOLD
If users choose the items “Call waiting” and”
three way talk” for the added value service, press
“Hold” in the course of the call, can hold the call
temporarily , can dial other numbers, press it
again then cancel the hold state.
8 PLAY In the state of on-hook Play the new voice message.
9
Speaker
In the state of on-hook, press this key
Using the handset, press this key and put down
the handset, the telephone can use the speaker
function to make a call.
In the mode of dialling number Common figures “0-9”
10 0－9
In the mode of configuration
Quick press it once, display the figure, and quick
press twice or N times, display the English
characters or other characters
In the mode of dialling number
Except dialing the third numbers in the three way
calls, there is no any function
11 *
In the mode of configuration
It is equal to the decimals among the
192.168.10.202
12 #
In the dialing mode (also select the item End
with ‘#’ of Digital Map in the WEB page)
It is equal to end the number
13 OK In the mode of configuration It is equal to the confirmation key.
14 EXIT In the mode of configuration Quit the last menu
15 MENU In the state of on-hook
Enter the configuration menu, needs to input the
password, the default password is 123
16 Sys info In the state of on-hook
See the telephone numbers in circle, IP, default
route
17 M1-M10 Quick dial
18 Transfer In the state of picking up the telephone Call transfer
2 Power lights on the faceplate: display power supply, long light.
3.3 LCD Icon Explanations
IP Phone PH802’s LCD is equipped with the backlight, can see all the icons displaying the pictures
while turn on the phone.
Wuchuan Network Tech Co., Ltd
www.5111soft.com
6
Icon LCD Icon Definitions
Network Status Icon: FLASH in the case of Ethernet link
Failure or the phone is not registered properly.
Network Status Icon: ON when Phone work on DHCP mode and FLASH when DHCP client
is not registered successfully. OFF when Phone is work on another mode.
Network Status Icon: ON when Phone work on Static mode and FLASH when IP address is
disable. OFF when Phone is work on another mode.