User guide

PH802 User Guide

3.1 Installation

◆ Insert the power adapter’s plug into the phone front Power jack (DC 5V) and the 2-prong plug end of

which into grounded power outlet;

◆ Start up the IP phone by turning the front switch stated ‘ON’ & ‘OFF’ to ‘ON’;

◆ Connect the internet cable into wan port, and then follow below installation checking way.

If need to set up small LAN network, find the LAN cable in the box and connect between LAN port and

your PC (PC is not required to set up for making a call)

3.2 Product Appearance, Name and Function of Each Part

IP phone PH802 is similar with the common telephone in the appearance design; the appearance and

keypad buttons name are showed as follows:

PH802 series IP phone has 36 buttons and 2 power lights; the definition is showed as below:

Item Name Operation Function/Display

1 Redial Enter the dial mode and press this key Redial the previous number and call out

In the off-hook state, press this key Increase volume (Max configuration is 9)

2 UP

Enter the configuration mode, press this key Option of configuration page (Upwards pages)

In the off-hook state, press this key Debase volume (Min configuration is 1)

3 Down

Enter the configuration mode, press this key Option of configuration page (Downwards pages)

4 Call list In the on-hook state, press this key

Display the Received calls, Missed calls, Dialed

calls

5 REC In the off-hook state, press this key

Begin to record the call, press again to finish

recording the call

Wuchuan Network Tech Co., Ltd