User guide

PH802 User Guide

The operation is: must Enable Call Waiting and Enable Three Way Call first. A can call B, after

talking, A presses HOLD button to keep the talking with B, when hearing the dialing tone, can call C,

ended by key #, A and C can talk. A presses HOLD button again to back the talking of A and B, at this

time, presses key * to realize the 3-way call.

Note: Once the three-way initiator concludes the three-way calling, the other two sides can not

continue the conversation call and hand up automatically.

5.3 Display the Online State of User

There are 10 M keys in the phone，can set the online state of the stored numbers，users can see the online

state of the stored numbers. After setting, press a valid memory keys to dial the stored number directly

while in the state of handfree or picking up the handset.

Press the key ”M” without any pressing action, can see the number in the corresponding key on the

screen, if do any action, will restore within 5 seconds.

If want to modify the definition of the M key, press the key ”DEL” within the displayed 5 seconds, input

the new stored number. Press “ok” after confirmation, each memory keys can be set likes this.

After setting, can see clearly the state of each M key and the display of corresponding indicator. When

using, press a valid memory keys to dial the stored number directly while in the state of handfree or

picking up the handset.

If without any setting (the number is vacant), indicator M isn’t light. After setting, if the number is

online, indicator M will be changed to green, if the other side is offline, displays red, if it is green and

twinkle, means the other side is in busy line.

5.4 Voice message indication function

Local voice message indicator: enable local voice message function, the phone LCD will have

there is new voice message, press Play to listen to it.

Server voice message indicator: The phone LCD will flash with new voice message (need server

support)

Note: Presence only supports SIP1 account inquiry.

6. Default Factory Setting

◆ The port WAN accept IP address in the mode of DHCP, if it is transferred into the static mode, the IP

address is 192.168.1.179, the LAN address is 192.168.10.1.The DHCP and NAT will work

automatically.

◆ Use the SIP protocol automatically, the SIP port is 5060

◆ HTTP port is 80, Telnet port is 23

◆ Use the key”#” to end the number

Wuchuan Network Tech Co., Ltd