User guide

PH802 User Guide

Wuchuan Network Tech Co., Ltd

www.5111soft.com

maximum voice message and conversation record is 3.

◆ User can do as the following step to set the voice message IVR: advanceÆcall serviceÆenable

voice record and user-defined voice and click “apply”. You also need to set in the phone:

menu->123—>okÆdownÆvoice recordÆokÆdownÆuser definedÆokÆswitchÆokÆdel

Æ1—>OK to enable the voice message IVR function.

◆ If want to hear the another party’s real time contents in the situation of opening the sound and

words box, needs to set on the web configuration page: advanceÆcall serviceÆincoming

record playing.

◆ Record the IVR: menu->voice record Æuser-definedÆrec, then can record your voice, press

“ok” to begin record, press the key ”REC” to end the record.

◆ menu->123ÆokÆdownÆvoice recordÆokÆdownÆlocalÆokÆdownÆrec Can record one

piece of message in the phone, other people can hear your message. Set the phone likes this:

menu->voice record –>local –>rec

5.1.2 Configure IP phone’s IP address

The phone is work in default DHCP mode, if there is no DHCP server in LAN, please do as following

to switch to Static IP mode:

◆ Long press number key 1 to switch to Static IP mode, user can configure the IP phone address,

DNS, gateway via IP phone menu button.

◆ Long press number key 2 to switch DHCP IP mode, default work mode is DHCP.

◆ Long press number key 3 to switch PPPOE IP mode.

5.1.3 Incoming call answering: three ways to answer the incoming call.

◆ Pick up handset to receive incoming calls

◆ Press Speaker button

◆ Use voice message to record the incoming call and press “play” key to listen. Voice message

setting: enter menu->123->ok->down->voice record->ok->received->old->List No, can play

or delete.

Note: Don’t use the handset and the hand-free call at same time. The phone is in “hand-free” mode

after press the key” hand-free”, at same time, if picking up the handset, the hand-free will close auto.

5.2 Advance Function Explanation

The following four methods can turn on or off with the specific configuration in system (the specific

operation methods is introduced by the following introduction）.

Note: Make sure this function is turned on while using this function.