User guide

PH802 User Guide

IAX2 server port

Username authentication

Password authentication.

IAX2 local port in device

If IAX2 supports voice mail, the voice mail is in the letters form, it can’t input letters,

so replace the numbers with the name of voice mail.

If IAX2 supports voice mail, hereto configure the name of voice mail

If the platform supports circle loop, the echo test number is text formatting, then replace

the echo test number which gateway configured with the echo text number. This function can be tested

by platform or terminal. The call be tested it is normal or not from terminal to platform.

The number of echo test text.

The refresh time when IAX is registered.

Enable to register to the server.

The iax2 protocol is the default call protocol. That is said, if choose this option,

user picks up the handset and dial number, it will be communicated by IAX2 protocol. The default of

gateway is SIP protocol, this configuration is aimed at the caller party, the receiver party wouldn’t be

affected. If user configures this item, it won’t be used SIP, but IAX. If user wants to give a call by SIP

simultaneously, then can configure the function of prefix substitution in the item of Dial peer and

achieve the SIP call.

Enable to support G729.

5. Phone Operation

5.1 Keypad basic operation guide

Configure the IP phone via keypad, press “MENU” and input default password 123 to enter the

configure menu. Use “UP”, “DOWN” to change the options, “OK” is confirmation, “EXIT” the

previous step.

5.1.1 Voice message and call record

◆ If the phone has no answer, you can set voice message: advanceÆcall serviceÆenable voice

record –>apply to set the voice message, you can press ”REC” to record the conversation. The

Wuchuan Network Tech Co., Ltd