User`s guide

Network Power Switch v2.02 Site: WESTERN TELEMATIC, INC.
Commands:
/H Display this Help Screen
/G View/Set General Parameters
/P [n] View/Set Plug Parameters
/N View/Set Network Parameters
/S Display Plug Status
/T Reset Network Interface
/R Relogin as Different User
/D Set Plugs to Default Settings
/X Exit/Disconnect
/Boot <n> Boot Plug n
/On <n> Turn On Plug n
/Off <n> Turn Off Plug n
[n] = Optional Plug Name or Number
<n> = Required Plug Name or Number
n+n = Plug n and Plug n
n:n = Plug n through Plug n
* = All Plugs with Access
NPS>
Figure 3: System Help Screen
Network Power Switch v2.02 Site: WESTERN TELEMATIC, INC.
Commands:
/H Display this Help Screen
/S Display Plug Status
/D Set Plugs to Default Settings
/X Exit/Disconnect
/Boot <n> Boot Plug n
/On <n> Turn On Plug n
/Off <n> Turn Off Plug n
<n> = Required Plug Name or Number
n+n = Plug n and Plug n
n:n = Plug n through Plug n
* = All Plugs with Access
NPS>
Figure 4: User Help Screen
4.3. NPS Command/Menu Conventions
When invoking NPS commands and selecting items from configuration menus, note the following:
All NPS commands can be invoked at the NPS> command prompt, or from the General Parameters Menu, Port
Parameters Menus or Network Parameters Menu.
NPS commands are not case sensitive. All NPS commands are invoked by pressing [Enter].
To select an item from an NPS menu, key in the number for the item and press [Enter]. To exit from a menu, press
[Esc] at any time. Parameters defined up to that point will be saved.
To display the Help Screen, type /H [Enter].
The ",Y" option can be used to temporarily suppress the "Sure?" confirmation prompt. The ",Y" option is entered
at the end of the command line, immediately following the command or argument. For example, to reset the
network port without displaying the "Sure?" prompt, type /T,Y [Enter], or to switch off Plug 2 without displaying
the "Sure" prompt, type /OFF 2,Y [Enter].
NPS Series Network Power Switch -- User's Guide
file:///C|/WEBPAGE/guides/nps/NPSGUIDE.HTM (9 of 20) [12/1/1999 3:00:03 PM]