User`s guide

Easy to Use, Easy to Configure
Reboots and plug switching are controlled by simple ASCII commands sent to the unit via network, modem or from a
local PC. Set-up and configuration is also simple; easy-to-follow menus lead the user through the installation process.
Features:
Turn On/Off any AC Powered Device via Telnet, Modem or Local Terminal●
Eight (8) Individual Switched Outlets●
Dual 15 Amp Circuits●
Two Levels of Outlet Specific Password Security plus Network Security●
115 VAC and 230 VAC Models●
Typographic Conventions
Throughout this user's guide, typefaces and characters are used to denote the following:
COURIER FONT Indicates characters typed on the keyboard.
For example, /ON 3 or /OFF 5.
[Bold Font] Text set in bold face and enclosed in square brackets indicates a specific key.
For example, [Enter] or [Esc].
2. Unit Description
2.1. Front Panel
Figure 1: Front Panel
As shown in Figure 1, the NPS front panel includes a series of LED indicators which function as follows:
• ON: Lights when AC Power is applied to the NPS.
‚ RDY: Flashes when the NPS is ready to receive commands.
NPS Series Network Power Switch -- User's Guide
file:///C|/WEBPAGE/guides/nps/NPSGUIDE.HTM (3 of 20) [12/1/1999 3:00:03 PM]