Installation guide

96 Chapter 5:Database Services
Broadcast (e.g. X.Y.Z.255 or None) [None]: [Return]
Do you want to (a)dd, (m)odify, (d)elete or (s)how an IP address,
or are you (f)inished adding IP addresses: f
Do you want to add a disk device to the service (yes/no/?): yes
Disk Device Information
Device special file (e.g., /dev/sda1): /dev/sda1
Filesystem type (e.g., ext2, reiserfs, ext3 or None): ext2
Mount point (e.g., /usr/mnt/service1 or None) [None]: /var/mysql
Mount options (e.g., rw, nosuid): rw
Forced unmount support (yes/no/?) [no]: yes
Do you want to (a)dd, (m)odify, (d)elete or (s)how devices,
or are you (f)inished adding device information: f
Disable service (yes/no/?) [no]: yes
name: mysql_1
disabled: yes
preferred node: devel0
relocate: yes
user script: /etc/rc.d/init.d/mysql.server
IP address 0: 10.1.16.12
netmask 0: None
broadcast 0: None
device 0: /dev/sda1
mount point, device 0: /var/mysql
mount fstype, device 0: ext2
mount options, device 0: rw
force unmount, device 0: yes
Add mysql_1 service as shown? (yes/no/?) y
Added mysql_1.
cluadmin>
5.4 Setting Up a DB2 Service
This section provides an example of setting up a cluster service that will fail over IBM DB2 Enter-
prise/Workgroup Edition on a cluster. This example assumes that NIS is not running on the cluster
systems. To install the software and database on the cluster systems, follow these steps: