Installation guide

78 Chapter 4:Service Configuration and Administration
• Whether the service was disabled after it was added
• Preferred member system
• Whether the service will relocate to its preferred member when it joins the cluster
• Service Monitoring interval
• Service start script location IP addresses
• Disk partitions
• File system type
• Mount points and mount options
• NFS exports
• Samba shares
To display cluster service status, see Section 8.1, Displaying Cluster and Service Status.
To display service configuration information, invoke the cluadmin utility and specify the service
show config command. For example:
cluadmin> service show config
0) dummy
1) nfs_pref_clu4
2) nfs_pref_clu3
3) nfs_nopref
4) ext3
5) nfs_eng
6) nfs_engineering
c) cancel
Choose service: 6
name: nfs_engineering
disabled: no
preferred node: clu3
relocate: yes
IP address 0: 172.16.33.164
device 0: /dev/sdb11
mount point, device 0: /mnt/users/engineering
mount fstype, device 0: ext2
mount options, device 0: rw,nosuid,sync
force unmount, device 0: yes
NFS export 0: /mnt/users/engineering/ferris
Client 0: ferris, rw
NFS export 0: /mnt/users/engineering/denham
Client 0: denham, rw