Installation guide

Section A.6:Host Bus Adapter Features and Configuration Requirements 167
Host Bus Adapter Features
Single-Initiator
Configuration
LSI Logic SYM22915 Ultra160
Two VHDCI external
connectors
Two channels
Set the onboard
termination by using
the BIOS utility.
The onboard termination
is automatically enabled
or disabled, depending on
the configuration, even
when the module power
is off. Use jumpers to
disable the automatic
termination.
Set onboard termination
to automatic (the
default).
Use the internal SCSI
connectors for private
(non-cluster) storage.
Adaptec AIC-7896 on the Intel
L440GX+ motherboard (as
used on the VA Linux 2200
series)
One Ultra2, wide, LVD
port, and one Ultra, wide
port.
Onboard termination is
permanently enabled,
so the adapter must be
located at the end of the
bus.
Termination is permanently
enabled, so no action is needed
in order to use the adapter in a
single-initiator bus.