Installation guide

166 Appendix A:Supplementary Hardware Information
Host Bus Adapter Features
Single-Initiator
Configuration
Adaptec 29160LP Ultra160
VHDCI external
connector
One channel
Set the onboard
termination by using
the BIOS utility.
Termination is disabled
when the power is off,
unless jumpers are used
to enforce termination.
Set the onboard
termination to automatic
(the default).
Use the internal SCSI
connector for private
(non-cluster) storage.
Adaptec 39160
Qlogic QLA12160
Ultra160
Two VHDCI external
connectors
Two channels
Set the onboard
termination by using
the BIOS utility.
Termination is disabled
when the power is off,
unless jumpers are used
to enforce termination.
Set onboard termination
to automatic (the
default).
Use the internal SCSI
connectors for private
(non-cluster) storage.